View source for Products

{{DISPLAYTITLE:Products list}}
== RPi and clones ==
* [[Products/PiSerialPower|"PiSerialPower" Hat]]
[[Image:PiserialPower.jpg|100px|left]]
: Power-supply and debug Hat for RaspberryPi (and pin-compatible competitors).

<div style="clear:both"> </div>
== Development Modules ==
* [[Products/Module_GPIO_Demo|GPIO-Demo Module]]
[[Image:Module_GPIO_Demo.jpg|100px|left]]
: The GPIO-Demo module is intended to help prototyping, learning and development of communication modules for the DomoTab project.

<div style="clear:both"> </div>
* [[Products/LPC1224BO|LPC1224 Break-Out]]
[[Image:LPC1224-BO.jpg|60px|left]]
: Another development board for the LPC1224, closer to a full Break-Out than the GPIO-Demo module which is specific to the DomoTab project.

<div style="clear:both"> </div>
* [[Products/LPC1224mbed|LPC1224-mbed]]
[[Image:LPC1224-mbed.jpg|60px|left]]
: An "mbed ready" equivalent of the LPC1224 Break-Out board.

<div style="clear:both"> </div>
* [[Products/USB_UART|USB-UART Adaptator]]
[[Image:USBtoUART.jpg|100px|left]]
: USB to UART Adaptator, with possible UEXT connector support.

<div style="clear:both"> </div>

== Communication Modules ==
* [[Products/Module_RFSub1G|RF Sub-1GHz Module]]
[[Image:Module_RFSub1G.jpg|100px|left]]
: The Sub-1GHz RF module, Standalone, USB, or UEXT version.

<div style="clear:both"> </div>
== Projet "DomoTab" ==
* [[Products/DTPlug|The DTPlug]]
[[Image:DTPlug.png|100px|left]]
: DTPlug Gateway : Ethernet ---> 4x UEXT communication modules

<div style="clear:both"> </div>
* [[Products/PSMC|PSMC Module : Power Supply Monitor & Control]]
[[Image:PSMC.jpg|100px|left]]
: PSMC module, monitor power usage and control power output of an outlet (Requires a communication module).